Dr.Nanoxa ross infektocide
Glyoxal, glutaral, Didecyldimethylammonium Chloride Infektocide Surface And Environment Disinfectant
Advantages
-
Cleaning and disinfection in one step
-
Low dosage
-
Acts quickly
-
Even with high bacterial load
-
Broad spectrum of activity
-
FDA Approved
-
For disinfection of critical areas
Application
Ideal for use in Hospital care and nursing homes, gymnasium and wellness studios, schools, and health care facilities. For all wet areas, sanitary facilities and for swimming pools as well as for sunbeds and fitness equipment. For all water-resistant materials, surfaces and floors.
Dosage / Dilution
- High risk Area: 1% dilution with potable water (OT, ICU, ICCU, NICU, AKD Unit, Production area in pharmaceutical Industries etc.) | Contact Time: 10-15 minute
- General Area: 0.5% dilution with potable water (Wards, clinics, Laboratories, corridors & buffer areas etc.) | Contact Time: 10-15 minute
Directions for Use
- • For fumigation/fogging, use of ULV Fogger is highly recommended.
- • For mopping, 2/3 bucket system is highly recommended.
- • Contact time of 1 hr. for mopping/Spraying/fogging should be maintained. For mopping/spraying, surface should be visibly wet for at least 10-20 min for optimum result.
Safety & Hazard Warnings
CLP (EC) No 1272/2008: Danger
Hazard statements:
H314 – Causes severe skin burns and eye damage.
H317 – May cause an allergic skin reaction.
H331 – Toxic if inhaled.
H334 – May cause allergy or asthma symptoms or breathing difficulties if inhaled.
H335 – May cause respiratory irritation.
H341 – Suspected of causing genetic defects.
H412 – Harmful to aquatic life with long lasting effects.